FiveM Fender Flares: 6 Over-Fender Styles With a Live 3D Preview
FiveM fender flares, also called over-fenders or wheel arch flares, are the wide arches that make a car look lowered and aggressive. The Flares add-on of the FiveMRides Vehicle Studio measures each wheel arch of the car you upload and generates our own flares along it, in six styles, 2 to 12 cm wide, with a live 3D preview and optional side skirts, front lip and rear diffuser. The result is built into the car model. Price: free at launch, and the kit pieces and hand adjustment cost nothing extra.
- Styles (6): bolt (riveted over-fender), molded (smooth widening), offroad (flat flare), rocket (big riveted over-fender with a wide lip), pocket (boxy pocket flare) and smooth (blended, factory look).
- Width: 2 to 12 cm, on the front axle, the rear axle or both.
- Finish: body colour, second colour, black plastic, carbon or any colour you pick. Rivets are an option on bolt and rocket.
- Kit pieces: side skirts, front lip and rear diffuser, free, offered when the car scan can measure them.
- Fit: the wheels are moved out to match the flare width, and you can nudge each flare by hand in 3D.
- Seen in game: flares on four cars on our test server on November 15 2026. Driving and open doors were not tested, and some cars are refused.

What do the flares add-on and the widebody kit do?
The Studio finds the edge of each wheel arch on the car body, builds a flare along that contour and fits it to the surface. It is our own procedural shape, not a copy of a kit from another car, so it can go on a car that has no kit of its own. The preview in your browser uses the same shapes and numbers as the build. Ends of a flare that would cut into a door are trimmed by the build, and that trim is not shown in the preview.
Which flare style should I pick?
| Style | Look | Rivets |
|---|---|---|
| Bolt | A riveted bolt-on over-fender, the classic race car look | Optional |
| Rocket | A big over-fender with a wide lip, the street widebody look | Optional |
| Molded | A smooth widening that flows from the body | No |
| Smooth | A blended widening close to a factory look | No |
| A boxy pocket flare | No | |
| Offroad | A flat flare for trucks and rally builds | No |
How do I add fender flares to a FiveM car?
- Upload your car. Open the Vehicle Studio, upload the car and wait for the scan, which measures every wheel arch.
- Open the Flares panel. Pick a style, the axles (front, rear or both) and the width with the slider from 2 to 12 cm. The flares update live on the car.
- Choose the finish. Body colour and second colour follow the paint you pick in the garage. Black plastic, carbon or any colour are fixed finishes.
- Add the kit pieces if you want them. Tick side skirts, front lip or rear diffuser. A piece is greyed out, with the reason, when the scan cannot measure it on this car.
- Adjust by hand if needed. Click a flare and use the 3D handles to move, tilt or scale it a little. Reset this flare puts it back.
- Keep Widen the track to match ticked, then build. Download the ZIP and test the car.
Do the wheels follow the flares?
Yes. With Widen the track to match ticked, the wheels are moved out by the amount that matches the flare width, so the tyres fill the arch. The order of the build is widebody, flares, engine, and the Stance tool is applied last, so your own ride height and camber stay as you set them. See the Stance guide.

How precise is the hand adjustment?
It is for small nudges. Each arch has limits measured on your car, and the build checks the exact result again: if a flare would float off the body or cut into it, the build stops with the numbers and no credit is used. In our tests the tolerance was about half a centimetre, far smaller than the range the panel allows in theory, so use the width slider for big changes and the handles to line a flare up.
What did we test?
On November 15 2026 on our test server we saw flares on four cars: a sedan, an SUV, a muscle coupe and a sports coupe (front only on the last one). The flares showed on every arch and the wheels sat out to match. We did not test driving and we did not test opening the doors with flares on. Not every car works: in the first round, three of seven test cars were refused cleanly, for example trucks with special arches. The Studio refuses instead of guessing, and the refusal costs nothing.

Limits
- Cars with arches the scan cannot measure are refused with a message, and no credit is used.
- Flares are part of the car model, not a tuning option you switch in the garage.
- The preview does not show the door trims. The build does them.
- Test your car on a dev server before real players use it.
Fender flare questions
How do I add fender flares to a FiveM car?
Upload the car in the Vehicle Studio, open the Flares panel, pick a style and a width from 2 to 12 cm, check the live 3D preview, and build. The flares are baked into the car model.
What flare styles are there?
Six: bolt, rocket, molded, smooth, pocket and offroad. Bolt and rocket can have rivets.
Do the flares work on any car?
No. The Studio measures each wheel arch and refuses the car, with a message and no credit used, when it cannot fit a flare cleanly. Some trucks with special arches were refused in our tests.
Can I add side skirts, a front lip and a diffuser?
Yes, as free kit pieces, when the car scan can measure the sill and the bumpers. A piece that cannot be fitted is greyed out with the reason.
Do the wheels move out with the flares?
Yes, if Widen the track to match is ticked. The Stance tool stays last in the build order, so your own stance settings are kept.
How much does it cost?
Free at launch. The kit pieces and the hand adjustment are free, and a refused build costs nothing.